Screw conveyor KPH


Screw conveyor is intended for loading of walnuts into the hopper of the machine.  

The advantage of this equipment is that the raw materials are loaded in a single stream, increasing the performance of the calibrator.


Screw conveyor KPH is intended for loading (feeding) walnuts into the hopper of the machine for calibrating walnuts. The equipment is also suitable for loading of hazelnuts, chestnuts, etc.


Depends on the rotational speed of screw and ranges from 250 to 1200 kg / h.


  • Rotational speed of screw is regulated from 0.23 to 30 rpm;
  • Torque on the shaft: 264 (N⋅m);
  • Power supply parameters: voltage (380 ± 22) V, frequency (50 ± 1) Hz;
  • Power consumption: not greater than 4 kW;
  • Dimensions:  4500 x 2500 x 1100 mm (dimensions may vary depending on the needs of the client in terms of the volume of the hopper, the height of the calibrator, etc.);
  • Weight: up to 500 kg, depending on the agreed sizes of the hopper.


Contact us